
Vehicles moving too fast through your lot or driveway is a safety risk you can fix permanently. We install asphalt speed bumps with paint markings that slow every driver, every time.

Speed bump installation in National City places a permanent asphalt hump across a driveway, parking lane, or private road so vehicles must slow to a crawl before crossing. Most single-bump jobs on a prepared surface are complete in one day, with the area open to traffic by end of day after the asphalt cools and paint dries.
In National City, tight lot spacing, dense apartment complexes, and busy commercial access lanes mean fast-moving vehicles and pedestrians share the same pavement on a daily basis. A posted speed limit sign gets ignored. A physical speed bump does not. Whether you manage a small HOA community, a commercial parking lot, or a long residential driveway, a well-built asphalt bump is the most reliable traffic-calming tool available on private property.
A speed bump is only as durable as the surface it sits on. If your existing pavement is showing cracks or surface wear, it is worth addressing that first - our asphalt sealcoating and parking lot paving services can bring the surrounding pavement up to standard before the bump goes in.
If cars regularly cut through your parking lot or driveway at speeds that feel unsafe, a speed bump is the most direct fix. This is especially common in National City's denser neighborhoods where cut-through traffic on private lots is a real issue during peak hours.
If kids play near a driveway or parking area, or pets are frequently outside, fast-moving vehicles are a serious risk. A speed bump creates a physical force that slows every driver every time - no signs or reminders needed, no exceptions.
If a vehicle has come too close to a person, another car, or a structure on your property, that is a clear signal that traffic calming is overdue. A single incident is often enough to prompt property owners and HOA boards to act.
Straight, uninterrupted runs naturally encourage drivers to accelerate. Long access lanes in National City's apartment complexes and commercial properties often have no traffic calming at all. One or two bumps at strategic points breaks up the run and keeps speeds in check throughout.
We build hot-mix asphalt speed bumps for residential driveways, apartment complex lanes, commercial parking lots, and HOA private roads throughout National City. The approach is the same for all of them: mark the location, prep the existing surface so the new asphalt bonds correctly, lay and compact in layers to form the hump shape, and taper the edges so vehicles cross smoothly without bottoming out. The finished bump is painted with traffic-grade yellow or white stripes for visibility day and night.
Long driveways and parking lots often need bumps at more than one point - a single bump slows traffic at one location but a long straight run gives drivers room to accelerate between obstacles. We walk your site and recommend placement based on sight lines, lane length, and where pedestrians are most at risk. If the existing pavement around the bump location needs attention first, we can handle surface prep, crack sealing, or patching as part of the same project. For a complete lot upgrade, this service pairs well with our asphalt sealcoating and parking lot paving services.
Sized for single-family or multi-unit driveways where a low-profile bump keeps delivery vehicles and visitors from speeding through a tight space.
Built for commercial and apartment lots where multiple lanes may need bumps spaced at intervals to maintain low speeds throughout the property.
Installed on private HOA roads and shared access lanes with full documentation for the association's records and any required city review.
A longer, more gradual profile suited to shared access roads where you want vehicles to slow without coming to a near-stop at every crossing.
National City packs apartment complexes, commercial strips, and residential neighborhoods into a small area - which means vehicles and pedestrians share tight spaces constantly. Long private access lanes at apartment complexes off National City Boulevard often have no traffic calming at all, and parking lots near the Mile of Cars corridor see high daily traffic volumes. A well-placed speed bump is a practical, low-cost tool that protects people on your property without requiring city involvement or ongoing enforcement. National City's mild climate also means there are almost no scheduling constraints - we can install year-round outside of the short rainy season, and the asphalt cures quickly in the warm, dry conditions here.
We install speed bumps throughout the South Bay area. In Chula Vista, we work on residential and HOA properties with similar lot layouts and the same permit considerations as National City. In Coronado, we handle commercial and multi-family properties where traffic management is a priority on private access roads. The National Highway Traffic Safety Administration provides guidance on traffic-calming devices and their effectiveness for property owners researching their options.
Contact us and describe your property - where the bump will go, how wide the lane is, and roughly how many you need. We visit the site before quoting because the existing pavement condition and exact location both affect the price. You will hear back within one business day.
After the visit you receive a written quote covering bumps, surface prep, painting, and cleanup. Review what is and is not included - especially paint markings. We address any HOA or permit requirements before scheduling so there are no delays on installation day.
The crew arrives with equipment and hot-mix asphalt, marks the bump location, cleans and preps the existing surface, then lays and compacts the asphalt in layers to form the bump. The area is blocked off while the material cools. A single bump on a prepared surface typically takes a few hours.
Once the asphalt has cooled, the crew applies yellow or white traffic-grade paint stripes for visibility. We walk the site with you before closing out - check the bump height, taper, and paint. Any concern you raise gets addressed before we leave.
We visit your property, assess the existing pavement, and give you a written price - no obligation and no pressure.
(858) 599-0449National City's older driveways and parking lots often have existing cracks or surface movement from the region's clay soils. We assess the existing pavement during the site visit and address any issues first - a bump bonded to a failing surface separates prematurely and wastes your investment.
Our state contractor license is active and publicly searchable through the California Contractors State License Board. A licensed contractor has met California's requirements for financial responsibility and experience - and gives you legal recourse if something goes wrong.
We handle the written scope of work your HOA needs to review the request, and we confirm any city permit requirements before work begins. Property owners in National City's South Bay communities should not have to navigate that paperwork alone.
Every speed bump we install gets bright yellow or white traffic-grade paint stripes that are built for Southern California's UV exposure. Visibility at night and in wet weather is not optional - it is part of a properly finished job.
You can confirm our active California contractor license at any time through the California Contractors State License Board. A written contract, proper surface prep, and a bump that meets National City's local requirements are the baseline for every job we do - not extras you have to ask for.
Protect and refresh the surrounding pavement after speed bump installation with a full sealcoat application.
Learn MoreFull parking lot paving or resurfacing to bring your entire lot up to standard before or after bump installation.
Learn MoreSpeed bump installation is a one-day job that protects people on your property for years. Call us now or request a free on-site estimate and we will get you scheduled fast.